After completing the processing, maintaining the cleanliness of the CNC tools impacts processing quality and tool lifespan. Refer to maintenance videos and maintain the tools after use to ensure the stable quality of your creations.

• 
  Simply post-processing cleaning:
  After cutting is completed, immediately remove any remaining chips and grease from the tool. You can gently clear the surface using a brush, compressed air gun, or any similar tools.
• 
  After removing the tool from the trimmer, you can manually clean it using solvents or liquid cleaners. Gently wipe or brush the tool's surface, and then use a clean rag to dry it.
• 
  Some tools are prone to oxidation, especially high-speed steel tools. Before storing, you can apply a thin layer of rust inhibitor to the tool's surface to prevent oxidation.
• 
  When storing tools, make sure they are placed in a dry, clean area, away from moisture and corrosive substances. Storing the tools in dedicated toolboxes is best to prevent contact and damage between tools.

Regularly dismantle Cubiio X for cleaning.
Watch the demo video now:

Internal cleaning and maintenance (monthly):
1. Flip the Cubiio X and remove the 8 screws (Tool: Hex screwdriver H2). Carefully remove the bottom plate.
2. Use a vacuum cleaner to remove dust.
3. Clean the gears with a dry cloth.
4. Lubricate the gears.
5. Pull out the belt for about 10 cm.
6. Place the bottom plate back, and you may need to gently align the four belts for the gears to fit properly.
7. Flip the Cubiio X and secure the 8 screws (Tool: Hex screwdriver H2).
8. Power on the machine and execute the winding command.